How to Lay a Patio by Learn the Steps

How to Lay a Patio

Do you want to have a beautiful and relaxing view just a step outside your door? Then know how to lay a patio now!  But there are simple ways  on how to lay a patio and preparations to follow before building a beautiful and long-lasting patio. We will teach you ways on how to lay a patio which is helpful soothing for you and your family’s relaxation and quality time just within your backyard.

Steps on How to Lay a Patio

  • On learning how to lay a patio first, you have to choose an area of where to lay your patio. You should also plan ahead of the area size of where to lay your patio, for exact estimation of slabs needed for the allotted area.
  • Clean and give space for the slabs, hardcore, and mortar at least 15 cm. Lay 5-8 cm hardcore and distribute it and level it out by using a rake.
  • To level the hardcore, you must compact and level it using a wacker plate.
  • Dig wooden pegs into the ground by slowly hammering it. They should be on the same level or heights to mark the surface of the patio. You have to make sire that they are greatly even with any paving and/or manhole covers.
  • To create a unique design, place several slabs on the ground to distinguish which slabs best interlock together. To help you out, make some paper cut-outs as representation of scaled-down slabs. Design is vital on how to lay a patio.
  • Using a mortar mix, lay slabs on a bed of mortar 5-8 cm deep by pressing it down with your hands.
  • Leave at least 1 cm gap between each stab, this is to place mortar in between for its strong hold and durability.  Make sure that the slabs are in level with the pegs you placed earlier.
  • To have a beautiful patio, edge it with stone bricks laid on a 5-8 cm layer of mortar, pressing them closely together. For a clean fit, use a hammer and chisel to break the excess stone bricks when necessary.
  • Wash / Clean the slabs and get rid of the mortar splattered. Don’t let it harden.
  • Last step on how to lay a patio is to fill the paving slabs gaps with mortar.

 

Finishing Touches of How to Lay a Patio

After reading the guidelines on how to lay a patio, the next is to know the finishing touches of how to lay a patio.

 

  • Let it sit for a day or two. This gives it enough time for the mortar to dry-off and harden.
  • Don’t step on the patio or put something over it before the time allotted if you want to have your mortar and stab set exactly the way you put it.
  • When the mortars under slabs are dry you can fill gaps with mortar using a trowel, leveling the joints off. This lets water to be drained more effectively from your patio.
  • Finally, make sure you clean up any edges with a brush. It is important on how to lay a patio to remove excess mortars. Then leave the patio for a day or two.

Isn’t it good to learn new ideas on how to improve your home? Beautify your home now and learn how to lay a patio now!

 




Leave a Reply

*