How to Lay a Patio: Tips and Suggestions

how to lay a patio

Do you want to learn how to lay a patio? Indeed, having a patio in your garden or backyard can completely transform your place from boring to strikingly beautiful. A patio can be your own little space where you can just relax and have some fun.

 

While most people think that you have to pay an experienced builder to lay your patio, think again. You can actually be the one to do it. You can learn how to lay a patio and get the job done for half the price you usually pay the contractor. All you need to have is the essential materials and skills to follow directions on how to lay a patio.

 

 

How to Lay a Patio

 

Learning how to lay a patio is not that difficult. In fact, you can learn it even with zero experience on building and construction. The best way to succeed in doing this project is to invest on your materials. Find the best quality materials for your project. While it is not necessary to have high powered tools, it may significantly help in building your patio faster.

 

Here are the materials and equipment you should have before learning how to lay a patio:

 

– Materials hardcore

– Building sand

– Cement

-Woburnrumbled paviours

– Shovel, rake, wheelbarrow, wooden level pegs, hammer, spirit level, plank of wood, wacker plate, cement mixer, rubber mallet, bolster chisel, pointing trowel

 

How to Lay a Patio without Experience

 

This easy guide on how to lay a patio can be done even by those with zero experience in building and construction. By following these steps, you can quickly lay a patio in your garden or in your front yard.

 

First step on how to lay a patio is to measure the design of your patio. Put stakes in the 4 corners of your patio. Then tie some strings to determine concise area.

 

Then, dig deep into the soil. Make sure it is enough to accommodate for sand and other materials. Remove all grass, rocks, debris and at least 6 inches of dirt. Make the excavated ground as level as possible. But if your patio is adjacent to your house, make a slope from your house. Dig ¼ inch deeper every 3 feet away from your house.

 

Add a 5-inch layer of compressed gravel to the dug surface. Rake the gravel and make it leveled. By using a plate compactor, press the gravel until it is snuggled together.

 

Lay the slabs according to your chosen design. Leave at least ½ inch space between the stones as a mortar line. You may have to cut some stones to make them fit in your pattern. You can utilize a masonry blade with diamond chips on a circular saw for cutting natural stone.

 

Last but not the least, sweep stone dust or sand in to the crevices between the stones. Wet the patio with your garden hose but not directly into the cervices. And that’s it on how to lay a patio.

 

 

 




Leave a Reply

*