How to Lay a Patio without Brick-Cutting

How to Lay a Patio

A simple patio design can bring out the elegance and beauty of your garden. Unlike what most of us think, it is easy to learn how to lay a patio. In fact, you don’t really need to have a prior experience on construction and building. I can give you a step-by-step guide on how to lay a patio in your garden that you can follow. This is very easy and can be done by average-skilled people.

Materials You Need to Succeed on How to Lay a Patio without Brick-cutting

This brick patio design is very easy to build yet elegant. You will lay the brick in a striking pattern but the surprising part is that, you don’t need to cut the bricks! This procedure on how to lay a patio  will take roughly about 2 days to complete.

Here’s a complete list of materials for creating this patio:

  • Shovel and rubber mallet
  • Paving bricks
  • Broom
  • Landscape fabric
  • Crushed stone
  • Plywood
  • Mason’s line
  • Level
  • 2×4
  • Garden hose

Once you have all of these materials and tools complete, you are ready to learn how to lay a patio without cutting bricks.

How to Lay a Patio without Brick-cutting Steps

First thing you have to do on how to lay a patio is to measure the area you want your patio to be installed in. It would be easier if you have a rectangular design plan than a curved one.

Dig out the area to a depth of 8 inches. Check if the floor slopes of your excavation is about 1/4 inch away from your home for drainage by using a level. This ensures that the water flows from the patio and house.

Lay your brick pattern and check your measurements. Through this, you can check if your initial measurements are off. Make an extra 2 inches along the perimeter. This is for the insertion of brick edging. Stand the bricks on end. Tap them into place with a rubber mallet.

Remove the bricks that you laid as test run but keep the brick edging. Pour crushed stones into this framed area to a depth of 4 inches. Tamp down the stone. Pour 2 inches of sand on the landscape fabric by using a long 2×4 as a screed.

In the next step on how to lay a patio, level the sand out. Run the screed on the sand to level it. The level of sand should be about 2 inches below the bricks. Tamp down the sand.

Press down the bricks into the sand. Make sure you place each of these bricks as close together as possible. Use a rubber mallet to strike the bricks to help them settle into the sand. Better use bricks, which is about 4 x 8 and 2 inches thick.

It is easy to work with a design that you have copied in a magazine or online. But if you have your own, make sure you stick to the plan.

Run the mason’s line across the forms row per row. The mason’s line will be your guide for evenness.

Spread the sand over the bricks with a broom for even distribution. Use the garden hose to wet the sand so that it will settle in the cracks. But if these cracks are not totally filled, you should pour sand again. Once you feel it is stable, then you are finished with the process of how to lay a patio.

 




2 Responses to “How to Lay a Patio without Brick-Cutting”

  1. Read was interesting, stay in touch……

    […]please visit the sites we follow, including this one, as it represents our picks from the web[…]……

  2. Great Job…

    keep bringing more please I love this website…

Leave a Reply

*